Description
This 5.56 chambered 16" M4 Profile Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and QPQ coated M4 feed ramp extension.
Quench Polish Quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer Black Nitride or Melonite. QPQ is a huge improvement over Chrome Lined barrels. Unlike chrome lining, where the chrome is built up on the surface, QPQ converts the surface without the risk of dimensional build up. The technique is used when two or more of the following properties are required in a work piece:
|
Barrel
|
Specifications
|
|---|---|
| Caliber | 5.56 |
| Length | 16" |
| Material | 4150 Chrome Moly Vanadium |
| Profile | M4 |
| Finish | QPQ Corrosion Resistant |
| Gas System Length | Carbine |
| Gas Block Journal | .750" |
| Dimpled? | No |
| Twist Rate | 1:7 |
| Muzzle Thread | 1/2x28 TPI |
| Weight | 27.2oz |
| Barrel Extension | M4 Feed Ramps |
| Target Crown | 11 Degree |
Specifications
Caliber: |
5.56 |
Platform: |
AM-15 / AR-15 |
Barrel Length: |
16" |
Finish: |
Nitride |
Gas System: |
Carbine |
Profile: |
M4 Carbine |
Related Products
On Sale
Breek Arms Warhammer 2.0 & AR-15 Nitride BCG & 16" 5.56 Barrel M4 Profile
Breek Arms
MSRP:
$249.99
Now:
$149.99
Was:
$209.99
The Breek Arms WARHAMMER MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can...
Spike's 5.56 M4 Carbine 16″
Spike's Tactical
MSRP:
$826.00
Price:
$743.99
Forged Upper Receiver7075 T6 ConstructionForward AssistEjection Port DoorEjection Port Door SpringEjection Port Door Rod16" M4 Profile BarrelMIL-B-11595E CMVChrome Lined1/7 Twist Rate1/2 X 28 Thread...
16" 5.56 Nitride Complete Upper
ACME Machine
MSRP:
$469.99
Price:
$359.99
Barrel: 16" 4150 Black Nitride M4 ContourTwist: 1:7Caliber: 5.56 Chamber15" Free Float HandguardACME AR-15 Upper Receiver *Picture might show optional accessories
NEW
AM 16" 22LR Pencil Nitride 1:16 Complete Upper
ACME Machine
MSRP:
$469.99
Price:
$359.99
This ACME Machine 16 inch .22 LR Pencil barreled upper is great for easy conversion to a dedicated .22LR setup and works with CMMG or most .22LR components. This is the only 22LR lightweight barrel...
Low Profile Micro Gas Block .750 and Carbine Length Gas Tube
ACME Machine
MSRP:
$24.99
Price:
$19.99
This is our standard AR-15 Micro Gas Block. Designed with the minimum profile to fit under nearly any quad rail system, it snugly fits standard .750 diameter barrels. Includes Carbine Length Gas Tube...
Out of stock
7" Drop In Two-Piece M4 Carbine Handguard - Polymer
ACME Machine
MSRP:
$8.99
Price:
$7.19
These drop-in, mil-spec polymer handguards for the AR15/M4 are perfect for that USGI look. These handguards fit between the original Delta Ring barrel nut and the round handguard cap.Features:Make:...
Out of stock
16" M4 5.56 Rifle Build Kit NO BCG - Minus Lower
ACME Machine
MSRP:
$499.99
Price:
$379.99
Build Kit Includes:01-501: 16" 5.56 M4 Carbine Contour Barrel Chambered 1:8 Twist02-201: 5.56 Enhanced Bolt Carrier Group AR-15 Nitride03-110: 15" Super Slim Gen II Keymod05-774: AR-15 Upper Receiver...